BACK
Cubicost Takeoff for Rebar
SHARE
Share this discussion on
Overview:

TRB is BIM-based quantity takeoff software for rebar.

It works with Cubicost TAS, TME and TBQ, taking the lead in the era of BIM.

Now Available for:
Singapore, Malaysia, Hong Kong, Indonesia, Thailand, India, Taiwan, Macau, Philippines
TRB Global Version
  • Version:V2.6517.0.3388
  • Release Date:2017-10-09
  • Downloaded:1806
DOWNLOAD
TRB HongKong ZHM Version
  • Version:V2.6517.0.3388
  • Release Date:2017-10-09
  • Downloaded:113
DOWNLOAD
TRB Taiwan Version
  • Version:V2.6517.0.3388
  • Release Date:2017-10-09
  • Downloaded:53
DOWNLOAD

 

Update Features for English Version

 

1. Add Drawing Management and Check Rebar by Element in Rebar Layout and Single Element.

2. Improvements of efficiency and memory (New Project, F3 Batch Select, Calculation preparation).

3. Column.

3.1 Links in joint areas: show “Calculate by link” by default, support empty expression (non-calculation).

3.2 Parameter input is allowed and add remarks in Column Other Link Types.

4. Wall.

4.1 Improvement of U-shaped rebar calculation.

4.2 Improvement of Wall Segment Attribute.

4.3 Add Binder in RC wall (only for Indonesia).

4.4 Add Additional Rebar and Check in Wall Table.

5. Beam.

5.1 Add Select Link for left and right densified links.

5.2 Hooks are categorized as densified and non-densified zones.

5.3 Start distance of beam links allows for inputting parameter “S”.

6. Slab.

6.1 Hide Drawn Lines when drawing line to arrange.

6.2 Slab rebar anchorages are distinguished as end support, middle support.

6.3 “L” value is separate as longer or shorter span in slab support rebar.

6.4 Add Slab Table and Identify Slab Table (only for India).

6.5 Parameter input is allowed when adjusting slab bar scope.

6.6 Add an option to make control on identifying top and bottom bar (for Hong Kong).

7. Pile Cap and Isolated Foundation.

7.1 Improve the identification.

7.2 Optimize the translation of horizontal and vertical bar.

8. Others.

8.1 Categorized out Wall Column and Masonry Wall in View Quantity by Category.

8.2 Add calculation method for Anchorage and Lap Settings (only for Singapore-Eurocode).

8.3 Adjust default value of Anchorage and Lap Settings (only for Hong Kong).

8.4 Optimization of mesh area calculation of special-shaped elements.

8.5 Cloud Authorization.


Update Features for Hong Kong (Traditional Chinese) Version


1. Add Drawing Management and Check Rebar by Element in Rebar Layout and Single Element.

2. Improvements of efficiency and memory (New Project, F3 Batch Select, Calculation preparation).

3. Column.

3.1 Links in joint areas: show “Calculate by link” by default, support empty expression (non-calculation).

3.2 Parameter input is allowed and add remarks in Column Other Link Types.

4. Wall.

4.1 Improvement of U-shaped rebar calculation.

4.2 Improvement of Wall Segment Attribute.

4.3 Add Binder in RC wall (only for Indonesia).

4.4 Add Additional Rebar and Check in Wall Table.

5. Beam.

5.1 Add Select Link for left and right densified links.

5.2 Hooks are categorized as densified and non-densified zones.

5.3 Start distance of beam links allows for inputting parameter “S”.

6. Slab.

6.1 Hide Drawn Lines when drawing line to arrange.

6.2 Slab rebar anchorages are distinguished as end support, middle support.

6.3 “L” value is separate as longer or shorter span in slab support rebar.

6.4 Add Slab Table and Identify Slab Table (only for India).

6.5 Parameter input is allowed when adjusting slab bar scope.

6.6 Add an option to make control on identifying top and bottom bar (for Hong Kong).

7. Pile Cap and Isolated Foundation.

7.1 Improve the identification.

7.2 Optimize the translation of horizontal and vertical bar.

8. Others.

8.1 Categorized out Wall Column and Masonry Wall in View Quantity by Category.

8.2 Add calculation method for Anchorage and Lap Settings (only for Singapore-Eurocode).

8.3 Adjust default value of Anchorage and Lap Settings (only for Hong Kong).

8.4 Optimization of mesh area calculation of special-shaped elements.

8.5 Cloud Authorization.




Update Features for Taiwan Version


1. Add Drawing Management and Check Rebar by Element in Rebar Layout and Single Element.

2. Improvements of efficiency and memory (New Project, F3 Batch Select, Calculation preparation).

3. Column.

3.1 Links in joint areas: show “Calculate by link” by default, support empty expression (non-calculation).

3.2 Parameter input is allowed and add remarks in Column Other Link Types.

4. Wall.

4.1 Improvement of U-shaped rebar calculation.

4.2 Improvement of Wall Segment Attribute.

4.3 Add Binder in RC wall (only for Indonesia).

4.4 Add Additional Rebar and Check in Wall Table.

5. Beam.

5.1 Add Select Link for left and right densified links.

5.2 Hooks are categorized as densified and non-densified zones.

5.3 Start distance of beam links allows for inputting parameter “S”.

6. Slab.

6.1 Hide Drawn Lines when drawing line to arrange.

6.2 Slab rebar anchorages are distinguished as end support, middle support.

6.3 “L” value is separate as longer or shorter span in slab support rebar.

6.4 Add Slab Table and Identify Slab Table (only for India).

6.5 Parameter input is allowed when adjusting slab bar scope.

6.6 Add an option to make control on identifying top and bottom bar (for Hong Kong).

7. Pile Cap and Isolated Foundation.

7.1 Improve the identification.

7.2 Optimize the translation of horizontal and vertical bar.

8. Others.

8.1 Categorized out Wall Column and Masonry Wall in View Quantity by Category.

8.2 Add calculation method for Anchorage and Lap Settings (only for Singapore-Eurocode).

8.3 Adjust default value of Anchorage and Lap Settings (only for Hong Kong).

8.4 Optimization of mesh area calculation of special-shaped elements.

8.5 Cloud Authorization.


Related products
This product is only suitble for PC, please download it on your computer!
We need your email address to serve you better, please enter your email to download our products.
CONFIRM